Jump to content

Close
Photo
* * * * * 2 votes

Visual Guide To Mining Primecoin

primecoin mining digitalocean vps

  • Please log in to reply
36 replies to this topic

#16 chris1122

chris1122

    New Member

  • MEMBER
  • Pip
  • 3 posts
  • 0 topics
    • Time Online: 1h 38m 10s

Posted 09 December 2013 - 07:28 AM

root@Cordie99:~# /etc/init.d/supervisor start
Starting supervisor: Error: File contains no section headers.
file: /etc/supervisor/conf.d/primecoin.conf, line: 1
'command=/root/primecoin/src/primeminer -pooluser=ALWhAu7h7ZqURRDZX3aobxvWqAaUevQwG2 -poolip=54.200.248.75 -poolport=1337 -genproclimit=1 -poolpassword=x\n'
For help, use /usr/bin/supervisord -h
 
 
getting this when trying to start


Cryptocointalk.com doesn't endorse any ads. Warning: ads my be illegal or untrustworthy in your jurisdiction. Advertising Here.

#17 Vasservice

Vasservice

    New Member

  • MEMBER
  • Pip
  • 6 posts
  • 0 topics
    • Time Online: 1h 47m 46s

Posted 10 December 2013 - 02:00 AM

First enter the following line which will open the text file edit:

nano /etc/supervisor/conf.d/primecoin.conf

 

Then enter your code (replacing the pooluser with your wallet address): 

 

[program:primecoin]

command=/root/primecoin/src/primeminer -pooluser=XXX_PRIMECOIN_ADDRESS_HERE_XXX -poolip=54.200.248.75 -poolport=1337 -genproclimit=1 -poolpassword=x
stdout_logfile
=/var/log/supervisor/%(program_name)s.log
stderr_logfile
=/var/log/supervisor/%(program_name)s.log
autorestart
=true

 

This is right way



#18 chris1122

chris1122

    New Member

  • MEMBER
  • Pip
  • 3 posts
  • 0 topics
    • Time Online: 1h 38m 10s

Posted 10 December 2013 - 05:03 AM

cheers guys working fine now, just one more question how are you checking your  xpm/h, and when is the xpm moved to my wallet after a certein amount or do I need to move it myself?

 

thanks in advanced

Noob Chris



#19 caglar41

caglar41

    New Member

  • MEMBER
  • Pip
  • 8 posts
  • 0 topics
    • Time Online: 7h 40m 15s

Posted 10 December 2013 - 05:27 AM

cheers guys working fine now, just one more question how are you checking your  xpm/h, and when is the xpm moved to my wallet after a certein amount or do I need to move it myself?

 

thanks in advanced

Noob Chris

 

I want to know the answer to that :)



#20 caglar41

caglar41

    New Member

  • MEMBER
  • Pip
  • 8 posts
  • 0 topics
    • Time Online: 7h 40m 15s

Posted 10 December 2013 - 06:19 AM

How can I solve this problem?
 
root@xpm:~# /etc/init.d/supervisor start
Starting supervisor: Error: Another program is already listening on a port that one of our HTTP servers is configured to use.  Shut this program down first before starting supervisord.
For help, use /usr/bin/supervisord -h
 
 
 
 
root@xpm:~# tail -f /var/log/supervisor/primecoin.log
********************************************
usage: current maximum supported number of threads = 32
 
********************************************
*** running time: 0.000h
***
*** valid: 0    (0.000%)
*** rejects: 0  (0.000%)
*** stale: 0    (0.000%)
********************************************
********************************************
*** Xolominer - Primecoin Pool Miner v0.8 RC1
*** by xolokram/TB - www.beeeeer.org - glhf
***
*** thx to Sunny King & mikaelh
*** press CTRL+C to exit
********************************************
 


#21 johnnytran

johnnytran

    New Member

  • MEMBER
  • Pip
  • 22 posts
  • 3 topics
    • Time Online: 9h 10m 35s

Posted 10 December 2013 - 07:02 AM

cheers guys working fine now, just one more question how are you checking your  xpm/h, and when is the xpm moved to my wallet after a certein amount or do I need to move it myself?

 

thanks in advanced

Noob Chris

 

To check your pool stats directly go here:

http://beeeeer.org/user/WALLET_ADDRESS_HERE

 

To see additional statistics you from the beeeeer.org pool you can go here:

http://xpm.syware.de/?a=WALLET_ADDRESS_HERE

 

Payouts are made when your total reaches 3.01 XPM.



#22 caglar41

caglar41

    New Member

  • MEMBER
  • Pip
  • 8 posts
  • 0 topics
    • Time Online: 7h 40m 15s

Posted 11 December 2013 - 04:22 AM

Hey guys i have one VPS on 48CPU; now what write this;  genproclimit=1     ( i dont write 1 ?)  i write;  genproclimit=48 thats true?? or?



#23 Aesadai

Aesadai

    New Member

  • MEMBER
  • Pip
  • 6 posts
  • 0 topics
    • Time Online: 1h 53m 28s

Posted 11 December 2013 - 01:48 PM

ANY chance of you posting something like this for mining protoshares?  I was thinking of starting to mine that on the beeeeeer sub pool.



#24 Aesadai

Aesadai

    New Member

  • MEMBER
  • Pip
  • 6 posts
  • 0 topics
    • Time Online: 1h 53m 28s

Posted 11 December 2013 - 06:09 PM

From what you posted I would re-enter the following code:

apt-get install supervisor
mkdir -p /var/log/supervisor
touch /etc/supervisor/conf.d/primecoin.conf
nano /etc/supervisor/conf.d/primecoin.conf
[program:primecoin]
command=/root/primecoin/src/primeminer -pooluser=XXX_PRIMECOIN_ADDRESS_HERE_XXX -poolip=54.200.248.75 -poolport=1337 -genproclimit=1 -poolpassword=x
stdout_logfile=/var/log/supervisor/%(program_name)s.log
stderr_logfile=/var/log/supervisor/%(program_name)s.log
autorestart=true
/etc/init.d/supervisor start

Try inputting those again and then calling:

tail -f /var/log/supervisor/primecoin.log

That should fix it. If it doesn't I would suggest trying again from scratch inputting one line of code at a time. It should work then.

 

This seemed to help some but then I get this:

 

Starting supervisor: Error: File contains no section headers.
file: /etc/supervisor/conf.d/primecoin.conf, line: 1
'xx\n'
For help, use /usr/bin/supervisord -h
 
Now it took me a few times to properly paste into putty since I'm new to it but got the hang eventually... could be I entered some X's that got saved.... is there a clean way to drop the conf file and redo those steps?


#25 Aesadai

Aesadai

    New Member

  • MEMBER
  • Pip
  • 6 posts
  • 0 topics
    • Time Online: 1h 53m 28s

Posted 11 December 2013 - 06:39 PM

From what you posted I would re-enter the following code:

apt-get install supervisor
mkdir -p /var/log/supervisor
touch /etc/supervisor/conf.d/primecoin.conf
nano /etc/supervisor/conf.d/primecoin.conf
[program:primecoin]
command=/root/primecoin/src/primeminer -pooluser=XXX_PRIMECOIN_ADDRESS_HERE_XXX -poolip=54.200.248.75 -poolport=1337 -genproclimit=1 -poolpassword=x
stdout_logfile=/var/log/supervisor/%(program_name)s.log
stderr_logfile=/var/log/supervisor/%(program_name)s.log
autorestart=true
/etc/init.d/supervisor start

Try inputting those again and then calling:

tail -f /var/log/supervisor/primecoin.log

That should fix it. If it doesn't I would suggest trying again from scratch inputting one line of code at a time. It should work then.

 

Okay I got passed that last hurdle but now when I try and start the supervisor it says "Error: Another program is already listening on a port that one of our HTTP Servers is configured to use.  Shut this program down first before starting supervisord" which I take to mean that its already running but then the tail says there is no primecoin.log file so then I figure that supervisor started without the config done so I go to stop the supervisor WHICH seems to do something (says "Stopping Supervisor" or what not).... but when I go to start the supervisor again I keep getting the same error about another program....  PLEASE HELP! I'm so close!... would be happy to give pay for a fiverr job or send 5 bucks to a paypal address if you could help me resolve???



#26 Aesadai

Aesadai

    New Member

  • MEMBER
  • Pip
  • 6 posts
  • 0 topics
    • Time Online: 1h 53m 28s

Posted 11 December 2013 - 08:23 PM

Okay.... I know this is my third post on this thread but I just wanted to pass on that I got it to work.  Ultimately rebooting is what did the trick for me.  I have 5 nodes up and running and can't believe how awesome this is!  Thank you so much for showing us this now I can finally turn off my lame laptop workers that were probably going to break my laptop anyway.

 

That said in Digital Ocean I noticed that the CPU usage is pretty low (around 60%) and am wondering if there is a way to tweek this to get more out of it.  Any thoughts? Now that its rolling part of me doesn't want to touch it.  I currently am seeing between 5 - 7 chains/d on most nodes which is a great start so thanks again!



#27 NeoNetGen

NeoNetGen

    Newbie

  • MEMBER
  • Pip
  • 1 posts
  • 0 topics
    • Time Online: 31m 1s

Posted 11 December 2013 - 11:26 PM

I am currently a DO Client. I have the 10$ a month plan currently.. IT says im allowed 5 droplets.. i currently have only 1 running.. Can i set up the other 4 and not be charged an additional 10$ a month PER droplet?

Forgive me if this is a stupid question. im quite new to the entire mining process.. 

3 days in and this is what im looking at.. hell i dont even know if this is good or not.. any insight would be AWESOME


12.12.2013 0.0055    0.0011 XPM/h
11.12.2013 0.029    0.0012 XPM/h
10.12.2013 0.2916    0.0121 XPM/h
Last 100 payments:
Block    Date        Total    Add    Balance
3614    12.12. 5:05    0.33    +0.0014    0.3261
3610    12.12. 4:15    0.32    +0.0014    0.3248
3607    12.12. 3:45    0.32    +0.0014    0.3234
3606    12.12. 3:35    0.32    +0.0014    0.322
3589    12.12. 0:25    0.32    +0.0028    0.3206
3572    11.12. 21:25    0.32    +0.0014    0.3179
3563    11.12. 19:55    0.32    +0.0014    0.3165
3559    11.12. 19:15    0.32    +0.0014    0.3151
3555    11.12. 18:35    0.31    +0.0028    0.3137
3535    11.12. 15:05    0.31    +0.0014    0.311
3532    11.12. 14:35    0.31    +0.0014    0.3096
3530    11.12. 14:15    0.31    +0.0014    0.3082
3516    11.12. 11:45    0.31    +0.0014    0.3068
3510    11.12. 10:45    0.31    +0.0014    0.3055
3502    11.12. 9:25    0.3    +0.0014    0.3041
3500    11.12. 9:05    0.3    +0.0014    0.3027



#28 Aesadai

Aesadai

    New Member

  • MEMBER
  • Pip
  • 6 posts
  • 0 topics
    • Time Online: 1h 53m 28s

Posted 12 December 2013 - 12:05 AM

One more dumb question: can I use the same payout address for all 5? Does it treat them like different workers or does it confuse beeeeer?



#29 johnnytran

johnnytran

    New Member

  • MEMBER
  • Pip
  • 22 posts
  • 3 topics
    • Time Online: 9h 10m 35s

Posted 12 December 2013 - 01:45 AM

One more dumb question: can I use the same payout address for all 5? Does it treat them like different workers or does it confuse beeeeer?

You can use the same address for all 5. It dumps all your earnings to that address.

 

 

I am currently a DO Client. I have the 10$ a month plan currently.. IT says im allowed 5 droplets.. i currently have only 1 running.. Can i set up the other 4 and not be charged an additional 10$ a month PER droplet?

Forgive me if this is a stupid question. im quite new to the entire mining process.. 

3 days in and this is what im looking at.. hell i dont even know if this is good or not.. any insight would be AWESOME


12.12.2013 0.0055    0.0011 XPM/h
11.12.2013 0.029    0.0012 XPM/h
10.12.2013 0.2916    0.0121 XPM/h
Last 100 payments:
Block    Date        Total    Add    Balance
3614    12.12. 5:05    0.33    +0.0014    0.3261
3610    12.12. 4:15    0.32    +0.0014    0.3248
3607    12.12. 3:45    0.32    +0.0014    0.3234
3606    12.12. 3:35    0.32    +0.0014    0.322
3589    12.12. 0:25    0.32    +0.0028    0.3206
3572    11.12. 21:25    0.32    +0.0014    0.3179
3563    11.12. 19:55    0.32    +0.0014    0.3165
3559    11.12. 19:15    0.32    +0.0014    0.3151
3555    11.12. 18:35    0.31    +0.0028    0.3137
3535    11.12. 15:05    0.31    +0.0014    0.311
3532    11.12. 14:35    0.31    +0.0014    0.3096
3530    11.12. 14:15    0.31    +0.0014    0.3082
3516    11.12. 11:45    0.31    +0.0014    0.3068
3510    11.12. 10:45    0.31    +0.0014    0.3055
3502    11.12. 9:25    0.3    +0.0014    0.3041
3500    11.12. 9:05    0.3    +0.0014    0.3027

The way Digital Ocean works is that you put money in your account to fund it. They charge you hourly based on the droplets you choose to use. The hourly fee and the monthly fees are the same based on a 30 day cycle. So a droplet that costs $5 a month will cost $0.007 an hour.

Lets just say you put $10 in your account. You can start up 5 droplets and they each would be charging you $0.007 an hour as you use it. After about 12 days your balance should be at 0. 

 

Its up to you then to keep adding funds to your account to keep your droplets going. Also, make sure to destroy droplets if you no longer need to use them. Any droplet that exists will be charging you hourly.



#30 Extrapolator

Extrapolator

    New Member

  • MEMBER
  • Pip
  • 2 posts
  • 0 topics
    • Time Online: 1h 56s

Posted 15 December 2013 - 02:52 PM

I talked to their support team about raising the droplet limit, and they refused. The only way is either to disguise your miners into something else (at least do not call droplets Miner1, Miner2 etc), or to register several accounts. The good news is that mining is allowed :)

Here is the support team reply: 

Cryptocurrency mining is very CPU intensive, and due to the shared nature of our CPU allocations large-scale cryptocurrency mining will seriously affect the quality of service we can provide to the neighbouring servers on the same hypervisors as servers running cryptocurrency mining operations.

So, while we do not specifically prohibit cryptocurrency mining, we do restrict accounts doing so to prevent large-scale operations from affecting our infrastructure.

Therefore, at this time, we do not provide droplet limit increases to accounts currently engaging in this activity. This includes opening additional accounts for the purpose of mining.

We apologize for this inconvenience, but we have to do our best to provide fair usage for all our users.

Regards, 
Support Team 
DigitalOcean

 







Also tagged with one or more of these keywords: primecoin, mining, digitalocean, vps

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users